Project

DUCTILE FIBER REINFORCED COMPOSITES

Period
6 December 2016-31 December 2021
Project manager
Martin Fagerström

The project Fiber Composites with Ductile Properties aims to create and validate material models for the 3D-reinforced composite (developed by Biteam) under mechanical stress.

Project partners: Chalmers, KTH, Biteam, and Volvo Cars (as part of Research Area) 

Short facts

Research area
Human body protection
Financier(s)
Energimyndigheten
Partners
Chalmers University of Technology
Others (see project description)
Project type
SAFER connected project

Related publications

Macroscale Modelling of 3D-Woven Composites: Inelasticity, Progressive Damage and Final Failure

Composites with 3D-woven reinforcement have been slowly making their way into different industrial applications. The interlacement of yarns, not only in-plane but also through-thickness, means that in many applications 3D-woven composites can outperform

Authors : Carolyn Oddy
Year : 2022
Published in : Chalmers

Extended framework for geometric modelling of textile architectures

Three dimensional (3D) textiles are finding their way into fibre reinforced composite applications, and for good reasons; they can eliminate the hazard of delamination and enable complex reinforcement shapes. There is therefore a need for engineering

Authors : Fredrik Stig, Stefan Hallström
Year : 2020
Published in : Composite Structures

Modelling 3D-woven composites on the macroscale: Predicting damage initiation and inelastic phenomena

Composites with 3D-woven reinforcement have been slowly making their way into different industries. The interlacement of yarns, not only in-plane but also through-thickness, means that in many applications 3D-woven composites can outperform their laminated

Authors : Carolyn Oddy
Year : 2020
Published in : Chalmers University of Technology

PREDICTING NON-LINEAR SHEAR DEFORMATION AND FAILURE IN 3D FIBRE-REINFORCED COMPOSITES

Authors : J C. Oddy, M. Ekh, and M. Fagerström
Published in : To be presented at 7th ECCOMAS Thematic Conference on the Mechanical Response of Composites: COMPOSITES 2019, Girona, Spain, September 2019

PREDICTING NON-LINEAR SHEAR DEFORMATION AND FAILURE IN 3D FIBRE-REINFORCED COMPOSITES

Authors : C. Oddy, M. Ekh, M. Fagerström
Published in : Submitted for at 22nd International Conference on Composite Materials, Melbourne, August 2019.

EVALUATION OF DAMAGE INITIATION MODELS FOR 3D-WOVEN FIBRE COMPOSITES

Three dimensional (3D) fibre-reinforced composites have shown weight efficient strength and stiffness characteristics as well as promising energy absorption capabilities. In the considered class of 3D-reinforcement, vertical and horizontal weft yarns

Authors : Carolyn Oddy, Tomas Ekermann (KTH), Magnus Ekh, Martin Fagerström, Stefan Hallström
Year : 2018
Published in : Proc. 18th European Conference on Composite Materials, Athens, Greece